Grade Carbon Pro

Grade Carbon Pro

GT
 5,499


Engineered to take you further and faster.

Floating Stays
All-day rideability
More vertical compliance on both aluminum and carbon models than the previous generation of Grade for a more comfortable time in the saddle, no matter the terrain.

Flip Chip Fork
Race ready or long and steady
The Grade Pro is equipped with a flip chip fork to provide 15 mm of adjustability. This allows riders to go from 55 mm to 70 mm of fork offset. Run the 55 mm offset for gravel races or flip to the "low- trail" 70 mm offset when you're loaded up with cargo on a bikepacking adventure.

DFD - Dual Fiber Dynamics
More control and less fatigue
The Grade's seat stays are comprised of two lightweight fibers: a tough composite of carbon and fiberglass. The solid fiberglass core provides toughness and damping, and the carbon fiber outer layers act to control stiffness. In the end, you have a bike that gives the rider a lot more control and less fatigue on the ride.

Smart Routing
Internal Di2 routing and dropper post compatible with stealth routing.

Removable Fender Bridge
Keep the skid marks on the trail.

Flatmount Brakes
Out of the box with native 160mm rotors front/rear on the Grade Carbon Pro. With a standard adapter, the Grade Carbon Pro can move up to 180mm rotors. This gives big braking power for when you're loaded down with lots of gear or charging into the rough.

Mounting Points Galore
All the frame and fork mounts for all the bags and bottles you need for a long tour. The Grade comes with top tube feed bag bosses and fork leg "anything cage" bosses. The alloy frame even has bottle bosses on the Seat Stays, that's pretty unique!

Tire Clearance
All Grades are spec'd with 37c width tires, but can easily accommodate up to 42mm measured clearance.

SIZES
48, 51, 55, 58, 61

MODEL CODE
G11100M
FRAME
All New Grade Carbon 700c Frame, EnduRoad Triple Triangle Design feat. Floating Seatstays, 12x142 Thru Axle, Flat Mount Disc (160mm), Tapered Headtube, Di2 and Dropper Compatible, PF30

FORK
All-New Grade Carbon fork with tapered carbon steerer, flip chip axle positioning, 12x100 Thru Axle, Flat Mount Disc (160mm), pannier and fender compatible

CHAIN
KMC X11, 11-speed

CRANK
FSA Energy Modular Adventure, 46/30

BOTTOM BRACKET
FSA PressFit 30

PEDALS
Not Included

FRONT DERAILLEUR
Shimano Ultegra Di2, braze-on

REAR DERAILLEUR
Shimano Ultegra RX 805 Di2

SHIFTERS
Shimano Ultegra Di2 hydro disc, 2x11

COG SET
Shimano 105, 11-34, 11-speed

RIMS
WTB KOM Light i23 TCS, 28h, tubeless ready

SPOKES
Stainless steel, 14g

BRAKES
Shimano Ultegra hydro disc, 160/160mm RT70 rotors

BRAKE LEVERS
Shimano Ultegra Di2 hydro disc

HANDLEBAR
All-New GT DropTune Super Light, double butted 6061 alloy, 16-degree flare

STEM
GT Design 3D forged 6061, 4 bolt face plate 6 Rise, 31.8mm Clamp

GRIPS
Velo Cork, 3mm
HEADSET
FSA NO. 44, Integrated, Sealed Bearing

SADDLE
Fabric Scoop Shallow Elite, cr-mo rails

SEAT POST
GT Carbon, 27.2x350mm (44-58), 400mm (61)

Have a question about Grade Carbon Pro?

981 Glenhuntly Road, Caulfield VIC 3162

  03 9563 6355 •   info@kaoscustombikes.com.au